Download Cover Page IJESR_November_2017......
PARTICULAR
|
Page No.
|
Concept Of Enhancement In Workload For Stochastic Analysis Of 3-Unit Standby System.
Upasana Sharma And Gunjan Sharma
Abstract:
This paper considers 3-unit cold standby system in which there is one main unit and two cold standby units. The system has a provision that whenever there is enhancement in workload of the system, both the cold standby systems also become operative with the main unit.
Download full Length Paper......
|
1-10
|
Creep And Hardness Property Study For UHMWPE Composites Using NANO Indentation.
Ravivardhan N A And Prof. T. JagadishSapembi,Kanyimbu Koj And Milambo Kasumba David
Abstract:
Ultra high molecular weight polyethylene (UHMWPE) is used as articulating surface material for hip joint replacements. Due to permanent deformation of material it leads to dislocation of artificial hip joint. Composite material was developed by blending UHMWPE with varying percentage of Multi walled carbon nanotubes reinforcement.
Download full Length Paper......
|
11-20
|
DCT-PCA based Face Recognition: An Efficient and Accurate Approach.
M. Sharmila Kumari
Abstract:
In this paper, we propose an efficient face recognition technique using combined approaches paradigm considering Discrete Cosine Transform (DCT) and Principal Component Analysis (PCA). In DCT-PCA, PCA is applied onto the extracted DCT coefficients of the face images. This technique is based on the Fourier spectra of the facial images.
Download full Length Paper......
|
21-27
|
Modulus Of Elasticity For Steel Fibre Reinforced Recycle Aggregate Concrete.
Y.Venkata Subbareddy, N.Venkata Ramana And C.Sashidhar
Abstract:
The paper presents the Modulus of Elasticity of recycle aggregate concrete reinforced with low strength steel fibers. In the experimental work the recycle aggregate is used in place of natural aggregate in the proportion of 0,25,50,75 and 100% with and without incorporation of steel fibers. The fibers were prepared by cutting the binding wire in required length of 50mm and the diameter was noticed as 1mm.
Download full Length Paper......
|
28-36
|
Bioactive Component Study Of Garcinia Cambogia Rind Extracts And Harnessing It's Potential For Food Product Development: A Novel Treatment For PCOS.
Pravalika Londe and Shubhi Agarwal
Abstract:
Garcinia Cambogia (kudam poli) traditionally known as kokum butter is used as a medicinal plant; claimes to possess antioxidant properties and significant antimicrobial activity. Garcinia Cambogia is found commonly in the evergreen forests of Western Ghats, Konkan south, Travancore, and in the Shola forests of Nilgiri. The fruit's active ingredient-HCA extracts is effectively used to relieve the symptoms of PCOS due to its potent antihyperglycemic & lipolytic effects.
Download full Length Paper......
|
37-56
|
How to Succeed as an Engineering Consultant Leader.
Vishesh M. Singh, P.E.
Abstract:
Traditionally, being a successful engineering consultant meant having great analytical skills and being a subject matter expert in your field. In today's fast-changing economy and with globalization, a leader in engineering consulting means possessing excellent leadership qualities, advanced technical skills, being aware of your competition, and making services cost-effective for your clients and your own company.
Download full Length Paper......
|
57-60
|
Numerical analysis of the effect of UWS injection characteristics on SCR system performance for marine diesel engine.
Jaedaa Abdulhamid, Prof T.V.K. Bhanuprakash and Prof. P.V.J. Mohan Rao
Abstract:
International maritime organization (IMO) has adopted strict regulations to control harmful oxides of nitrogen emissions from operating marine vessels. Tier III is the most stringent standard where around 80% NOx reduction efficiency is required. In order to satisfy these rules, NOx abatement technologies were developed and SCR is considered one of the most effective and promising methods that can meet such regulations.
Download full Length Paper......
|
61-71
|
RELIABILITY ASSESSMENT OF FLAT SLAB BUILDING USING
PUSHOVER ANALYSIS
Nikhil P, Rekha B
Abstract:
Concrete is said to be workable, durable but it is never mentioned as reliable
only because of the uncertainties that are present in it. These uncertainties can be measured
by performing reliability analysis. American Concrete Institute (ACI) code classifies the
state of structure based on reliability index value which is not specified in Indian codes.
This study was to compare the seismic response and reliability index by taking base shear
values of flat slab and conventional beam slab buildings using non-linear static analysis. It
is a method to calculate seismic performance point along with the failure pattern. Both the
buildings – flat slab and conventional beam slab – were analysed by considering the
uncertainties in material properties, geometric properties and loads applied. Pushover
analysis was carried out for different random values that were created by using Monte
Carlo Simulation method to get the reliability index. The non-linear static analysis was
carried out in SAP 2000 and the results were plotted. The study reveals that the flat slab
system has increased failure rate compared to the beam slab system with higher hinge
formations because of randomness and hence reliability analysis can be mandated as an
industrial practice. The current study not only reveals the comparative advantage but also
fills the gaps in failure pattern study, which is existing in this research fraternity
Download full Length Paper......
|
72-82
|
Gravimetric and Electrochemical studies of a Schiff Base as green corrosion
inhibitor for mild steel in 0.5 M H2SO4 solution
Anita Kumari, Gurmeet Kaurb, Raj Kishore Sharma, Gurmeet Singh
Abstract:
The corrosion inhibition of mild steel in 0.5M H2SO4 by Schiff bases,
namely,N1,N1'-(1,4-phenylene)bis(N4-(4-chlorobenzylidene)benzene-1,4-diamine)
[PCBA] has been studied by using weight loss and Tafel polarization method . These
studies were carried out at various temperatures and concentrations of this inhibitor. The
highest inhibition efficiency obtained was 96.86% (PCBA) at 200 mg L-1
. Results show
that the inhibition efficiency increases with increasing the inhibitor concentrations and
decreases with increase in temperatures. Tafel polarization indicated this inhibitor acted as
a mixed-type inhibitor. It is a very environmentally friendly compound.The adsorption of
inhibitor on mild steel surface obeys the Langmuir adsorption isotherm.
Download full Length Paper......
|
83-98
|
DEVELOPMENT OF ONLINE DATA MONITORING OF PERFORMANCE PARAMETERS OF
SOLAR PV/T MODULE
Charles Franklin JOSEPH
|
96-106
|
AIR POLLUTION MONITORING ORGANIZATION CENTERED ON IOT:
PREDICTIVE AND FORECASTING MODELING
Mala Malik
|
107-115
|
A STUDY ON DIFFERENT PREDICTIVE BIG DATA CLASSIFICATION TECHNIQUES
CHANDRA SHEKHAR S,DR. RAJEEV YADAV
Abstract:
Big data is used to achieve adaptable and practically identical outline of colossal data using strange woods district systems.
Download full Length Paper......
|
116-123
|
Adducts of Cobalt(II) complexes of cyclo(1,2)-dibigu-anidinyl bis[2-hydroxy-w-(benzoyl/4-chlorobenzoy1/3-nitrobenzoyl/3,5-dinitrobenzoyl)acetophenone] with pyridine, 2-methylpyridine and 4-methlpyridine
Dr. Anita
Abstract:
The conductance values (135-150 ohm-1 cm2mol-1)elemental analysis and molecular weight determinationindicated the Gornetslon of ionic
Download full Length Paper......
|
124-129
|
Preparation, characterization and applications of complexes
Dr. Archana R. Kocharekar
Abstract:
Preparation and design of coordination complexes, including transition metals, have been the focus of much attention because of their applications in biological processes, material sciences, catalysis, etc.
Download full Length Paper......
|
135-145
|
Call for Papers
